E-TECHAlloy Wheel Repair Hardening Filler/Putty Grey 10cm Tube

I was skeptical at first, but this E-TECH alloy wheel repair putty exceeded my expectations. After a minor curb incident, my alloy wheels had unsightly scuffs. Following the instructions, I applied the putty, let it harden, and sanded it down. The result? A smooth finish that matched the rest of the wheel perfectly.Pros:• Easy to apply with clear instructions• Dries hard and durable• Sands down to a smooth finishCons:• Requires patience for the best resultsHighly recommend for DIY enthusiasts looking to save on repair costs.

Isn't the easiest to spread but hardens quickly and I swear it's harder than the wheel

Worked a treat. Easy to paint after sanding.

This product works well and sets quickly. I take time to mask ‘only’ the area of damage, as don’t want to scratch even more of the alloy.Work a small amount into a ball and one colour, apply the putty, smooth out and leave for 24hrs.Spend time sanding back getting the shape right and a flush level with the alloy.The finish is good and ready for painting.My top tip - Don’t mask the area, fill and remove the tape before Sanding, otherwise the tape will pull all the putty off!My pics are: Before (kerb rash! Turned away from stationary position!)FilledSanded back.Hope this helps..

Used this for a small bit of kerb on my wheel , easy to apply and not messy, but the repair I did was too small to really test the product properly. A good price tnou.

Like any filler/bonder it's imperative that you clean and prepare the surfaces incredibly well before any attempt to get a good bond.I have used this to repair curb rash on alloy wheels and it works very well.If you're powder coating after any repairs then you must use a metal filler as standard body filler won't take the powder well, or cope with the heat required.Used a small file to file down over fill then sanded with 120grit.Continue sanding the surrounding area for a uniformed appearance, I then went to 240 and up to 800.It actually takes a media blast well too (fine) so if you're looking for an overall small metal repair putty that's got good adhesion, sets very hard, ideal for powder coating over then this is worth the money.Just remember to clean and prepare the surface extremely well so you don't have any issues with break off or poor repairs. 👍

Purchased this for a big repair on my wheel. Filled well and looks ok for a diy repair. Not sure if it will last as only just used. Need to work fairly quick before it starts to set. But seems ok.

Easy to use and creates a very good finish, but you have to work fast as it goes rock hard very quickly