ARCTICMX-6 (4 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conductivity, long durability, non-conductive, non-capacitive

More than adequate quantity for my need, could easily do another 3 or 4 CPUs with what is left.Price is fair for what you get, easy to dispense. Relatively easy to spread although thicker than some pastes so takes a little more time than some.An inclusion of a spreader would have been nice but doesn't detract from the quality of the product.Compact size, no funky smell and functions exactly as you'd expect.Idle temps down by 8c and as much as 20c under full load. Very impressed.

Nothing to compare it to, but quite impressed by the performance. Spread well on the CPU and appears to offer decent heat dissipation.Any issues I'll report back.Appears better than most thermal paste included with your stock cooler. May be worth spending the extra money when you're spending hundreds of pounds on components to make sure that they will last and buy this product.

This is a good quality thermal paste. Applied this to a Ryzen 7 9700X, with a good quality cooler, and the CPU rarely goes close to 50 degrees C. This obviously also depends on the load on the CPU but with a cheaper thermal paste it was frequently getting to 60 or higher under the same work conditions.The paste is quite thick and can be quite hard to get out of the applicator but with sufficient pressure it will release the paste. There is plenty of paste in the syringe for multiple applications. If you use all of the paste in a single application then you have put way too much on.While the MX-6 is a little more expensive than some other thermal paste it is worth it as, from my experience, it does help to transfer the heat from the CPU better than the cheaper pastes.

Reliable, affordable, easy to use, efficient, need I say more?

Used this in combination with my rudeness 73700x and the wraith prism. Was quite hard to apply due to the paste being quite thick. I doubt this is how it is meant to be. Probably got a defective product. However it does not seem to be impacting temps too much as my cpu does not run too hot, I would say it would be an issue if my cpu was exceeding reasonable temps and shutting down however it isn’t.

Works as advertised, but thick but that's the idea. Apply with caution!

easy to apply and very effective at cooling,this paste iswellworth the price

The ARCTIC MX-6 is an excellent thermal paste. I used it on my CPU and graphics card, and the results are impressive. It offers very high thermal conductivity, which helps keep my components cool under load. The 4g size is plenty for multiple applications. It’s easy to apply and spread evenly. Plus, it’s non-conductive and non-capacitive, so no worries about shorting out components. The durability is great, too. Overall, it's a top-notch choice for anyone needing high-performance thermal paste. 5 stars.